% 
% This file was created by the TYPO3 extension
% bib
% --- Timezone: CET
% Creation date: 2021-01-18
% Creation time: 02-59-17
% --- Number of references
% 45
% 

@Article { Perevoshchikova:2011,
   title = {A convex hull algorithm for minimization of Gibbs energy in two-phase multicomponent alloys},
   journal = {Solid State Phenomena},
   year = {2011},
   volume = {172-174},
   number = {Part 1},
   pages = {1214-1219},
   abstract = {We have adapted the Quickhull algorithm with the general dimension Beneath-Beyond algorithm {[}6] for computing the convex hull of the Gibbs energy hypersurface of multicomponent two-phase alloys. We illustrate the salient features of our method with calculations of isothermal ferrite-austenite equilibria in Fe-C-Cr. Finally, successive equilibrium calculations in a Fe-C-Cr-Mo steel over a large temperature range show the benefit of computing the convex hull before performing the conventional Newton-Raphson search.},
   note = {D{\'e}partement SI2M : Microstructures et Contraintes},
   editor = {Brechet, Y and Clouet, E and Deschamps, A and Finel, A and Soisson, F},
   series = {Solid State Phenomena},
   booktitle = {SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIALS, PTS 1-2},
   organization = {Mat \& Process Sci \& Engn Lab; CEA, Tranverse Programme Adv Mat; French Aerospace Lab; Inst Chem, Natl Ctr Sci Res; French Phase Field Network; Lab Etude Microstructures},
   ISSN = {1012-0394},
   DOI = {10.4028/www.scientific.net/SSP.172-174.1214},
   author = {Appolaire, Benoit and Perevoshchikova, Nataliya and Teixeira, Julien and Denis, Sabine}
}

@Article { 205-1830,
   title = {Activated carbons with appropriate micropore size distribution for hydrogen adsorption},
   journal = {International journal of hydrogen energy},
   year = {2011},
   volume = {36},
   pages = {5431-5434},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux Carbon{\'e}s},
   author = {Zhao, W. and Fierro, V. and Zlotea, C. and Aylon, E. and Izquierdo, M. T. and Latroche, M. and Celzard, A.}
}

@Article { 207-2166,
   title = {Anchorage and tension-stiffening effect between Near-Surface-Mounted carbon fibre reinforcement polymer rods and concrete},
   journal = {Cement and Concrete Composite},
   year = {2011},
   volume = {33},
   pages = {346{\^a}??352},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux pour le G{\'e}nie Civil},
   author = {AL-MAHMOUD, F. and CASTEL, A. and FRANCOIS, R. and TOURNEUR, C.}
}

@Article { ISI:000293729300017,
   title = {Atomic structure of Ag(111) saturated with chlorine: Formation of Ag3Cl7 clusters},
   journal = {PHYSICAL REVIEW B},
   year = {2011},
   volume = {84},
   number = {7},
   note = {D{\'e}partement P2M : Surfaces et Spectroscopies},
   ISSN = {1098-0121},
   DOI = {10.1103/PhysRevB.84.075452},
   author = {Andryushechkin, B. V. and Cherkez, V. V. and Gladchenko, E. V. and Zhidomirov, G. M. and Kierren, B. and Fagot-Revurat, Y. and Malterre, D. and Eltsov, K. N.}
}

@Article { Aubert2011603,
   title = {Behavior of platinum/tantalum as interdigital transducers for SAW devices in high-temperature environments},
   journal = {IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control},
   year = {2011},
   volume = {58},
   number = {3},
   pages = {603-610},
   note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin},
   web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-79952927772\&partnerID=40\&md5=723b9e8584f31f6fec9d523df7f1c2e9},
   author = {Aubert, T. and Elmazria, O. and Assouar, B. and Bouvot, L. and Hehn, M. and Weber, S. and Oudich, M. and Gen{\`e}ve, D.}
}

@Article { Aubert2011603,
   title = {Behavior of platinum/tantalum as interdigital transducers for SAW devices in high-temperature environments},
   journal = {IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control},
   year = {2011},
   volume = {58},
   number = {3},
   pages = {603-610},
   note = {Centre de Comp{\'e}tences : MiNaLor micro et nanotechnologies},
   web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-79952927772\&partnerID=40\&md5=723b9e8584f31f6fec9d523df7f1c2e9},
   author = {Aubert, T. and Elmazria, O. and Assouar, B. and Bouvot, L. and Hehn, M. and Weber, S. and Oudich, M. and Gen{\`e}ve, D.}
}

@Article { dehmas:2011c,
   title = {beta -> beta + alpha isothermal phase transformation in Ti17 titanium alloy: chemical composition and crystallographic aspect.},
   journal = {Solid State Phenomena},
   year = {2011},
   volume = {172-174},
   pages = {396-401},
   note = {D{\'e}partement SI2M : Microstructures et Contraintes},
   author = {Dehmas, M. and Kovac, J. and Aeby-Gautier, E. and Appolaire, B. and Denand, B. and Da-Costa-Teixeira, J.}
}

@Article { 205-1839,
   title = {Bimodal activated carbons derived from resorcinol-formaldehyde cryogels},
   journal = {Science and technology of advanced materials},
   year = {2011},
   volume = {12},
   pages = {035001 (12pp)},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux Carbon{\'e}s},
   author = {Szczurek, A. and Amaral-Labat, G. and Fierro, V. and Pizzi, A. and Celzard, A.}
}

@Article { 206-2144,
   title = {Chemical reactivity of self-organized alumina nanopores in aqueous medium.},
   journal = {Acta Materialia},
   year = {2011},
   volume = {59},
   number = {3},
   pages = {962-970},
   note = {D{\'e}partement CP2S : Surface et Interface, r{\'e}activit{\'e} chimique des mat{\'e}riaux},
   author = {ROCCA, E. and Vantelon, D. and Gehin, A. and Augros, M. and Viola, A.}
}

@Article { 201-2058,
   title = {Chemical vapour deposition enhanced by atmospheric microwave plasmas: a large scale industrial process or the next manufacturing tool?},
   journal = {Plasma Sources Science and Technology},
   year = {2011},
   volume = {20},
   pages = {024004},
   note = {D{\'e}partement CP2S : Exp{\'e}riences et Simulations des Plasmas R{\'e}actifs - Interaction plasma-surface et Traitement des Surfaces ESPRITS},
   author = {Belmonte, T. and Gries, T. and Cardoso, R.P. and Arnoult, G. and Kosior, F. and Henrion, G.}
}

@Article { ISI:000290719900005,
   title = {Chemical vapour deposition enhanced by atmospheric microwave plasmas: a large-scale industrial process or the next nanomanufacturing tool?},
   journal = {PLASMA SOURCES SCIENCE \& TECHNOLOGY},
   year = {2011},
   volume = {20},
   number = {2},
   abstract = {This paper describes several specific aspects of atmospheric plasma deposition carried out with a microwave resonant cavity. Deposition over a wide substrate is first studied. We show that high deposition rates (several hundreds of mu m h(-1)) are due to localization of fluxes on the substrate by convection when slightly turbulent flows are used. Next, we describe possible routes to localize deposition over a nanometre-sized area. Scaling down atmospheric plasma deposition is possible and two strategies to reach nanometre scales are described. Finally, we study self-organization of SiO(2) nanodots deposited by chemical vapour deposition at atmospheric pressure enhanced by an Ar-O(2) micro-afterglow operating at high temperature (>1200 K). When the film being deposited is thin enough (similar to 500 nm) nanodots are obtained and they can be assembled into threads to create patterned surfaces. When the coating becomes thicker (similar to 1 mu m), and for relatively high content in HMDSO, SiO(2) walls forming hexagonal cells are obtained.},
   note = {Centre de Comp{\'e}tences : ERMIONE informatique et calcul},
   publisher = {IOP PUBLISHING LTD},
   address = {DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND},
   type = {Article; Proceedings Paper},
   language = {English},
   ISSN = {0963-0252},
   DOI = {10.1088/0963-0252/20/2/024004},
   author = {Belmonte, T. and Gries, T. and Cardoso, R. P. and Arnoult, G. and Kosior, F. and Henrion, G.}
}

@Article { 202-2075,
   title = {Chemistry, phase formation, and catalytic activity of thin palladium-containing oxide films synthesized by plasma-assisted physical vapor deposition},
   journal = {Surface and Coatings Technology},
   year = {2011},
   volume = {205},
   pages = {S171-S177},
   note = {D{\'e}partement CP2S : Elaboration et Fonctionnalit{\'e} de Couches Minces},
   author = {Horwat, D. and Zakharov, D.I. and Endrino, J.L. and SOLDERA, F. and Anders, A. and Migot, S. and Karoum, R. and VERNOUX, P. and Pierson, J.F.}
}

@Article { ISI:000297104700022,
   title = {Commensurate-incommensurate phase transition in chlorine monolayer chemisorbed on Ag(111): Direct observation of crowdion condensation into a domain-wall fluid},
   journal = {PHYSICAL REVIEW B},
   year = {2011},
   volume = {84},
   number = {20},
   note = {D{\'e}partement P2M : Surfaces et Spectroscopies},
   ISSN = {1098-0121},
   DOI = {10.1103/PhysRevB.84.205422},
   author = {Andryushechkin, B. V. and Cherkez, V. V. and Kierren, B. and Fagot-Revurat, Y. and Malterre, D. and Eltsov, K. N.}
}

@Article { 206-2140,
   title = {Crystal structure and phase transition of bis-aqua-sebacato magnesium Mg(C10H16O4)(2)(H2O)(2).},
   journal = {Solid state sciences},
   year = {2011},
   volume = {13},
   number = {7},
   pages = {1438-1442.},
   note = {D{\'e}partement CP2S : Surface et Interface, r{\'e}activit{\'e} chimique des mat{\'e}riaux},
   author = {MESBAH, A. and ARANDA, L. and STEINMETZ, J. and ROCCA, E. and FRANCOIS, M.}
}

@Article { ISI:000287764900003,
   title = {Enhanced Photostability from CdSe(S)/ZnO Core/Shell Quantum Dots and Their Use in Biolabeling},
   journal = {EUROPEAN JOURNAL OF INORGANIC CHEMISTRY},
   year = {2011},
   pages = {794-801},
   note = {Centre de Comp{\'e}tences : X-Gamma rayons X et spectroscopie},
   ISSN = {1434-1948},
   DOI = {10.1002/ejic.201000790},
   author = {Aldeek, Fadi and Mustin, Christian and Balan, Lavinia and Medjahdi, Ghouti and Roques-Carmes, Thibault and Arnoux, Philippe and Schneider, Raphael}
}

@Article { 204-2125,
   title = {Facile general route toward tunable Magn{\'e}li nanostructures and their use as thermoelectric metal oxide/carbon nanocomposites},
   journal = {ACS Nano},
   year = {2011},
   volume = {5},
   pages = {9052},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux {\`a} propri{\'e}t{\'e}s thermo{\'e}lectriques},
   author = {PORTEHAULT, D. and MANEERATANAN, V. and CANDOLFI, C. and OESCHLER, N. and VEREMCHUK, I. and GRIN, YU. and SANCHEZ, C. and ANTONIETTI, M.}
}

@Article { 205-1836,
   title = {Flammability assessment of tannin-based cellular materials},
   journal = {Polymer degradation and stability},
   year = {2011},
   volume = {96},
   pages = {477-482},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux Carbon{\'e}s},
   author = {Celzard, A. and Fierro, V. and Amaral-Labat, G. and Pizzi, A. and Torero, J.}
}

@Article { Aubert2011,
   title = {Highly textured growth of AlN films on sapphire by magnetron sputtering for high temperature surface acoustic wave applications},
   journal = {Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films},
   year = {2011},
   volume = {29},
   number = {2},
   note = {Centre de Comp{\'e}tences : MiNaLor micro et nanotechnologies},
   web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-79952408208\&partnerID=40\&md5=864954e075bfa74d9656fb6c5c047d80},
   author = {Aubert, T. and Assouar, M.B. and Legrani, O. and Elmazria, O. and Tiusan, C. and Robert, S.}
}

@Article { 203-2102,
   title = {Lead adsorption on the Al13Co4 (100) surface: inhomogeneous nucleation and pseudomorphic growth.},
   journal = {New journal of physics},
   year = {2011},
   volume = {13},
   pages = {103011},
   note = {D{\'e}partement CP2S : M{\'e}tallurgie et Surfaces},
   ISSN = {1367-2630},
   author = {Addou, R. and SHUKLA, A. K. and ALARCON-VILLESECA, S. and Gaudry, E. and Deniozou, Th. and Heggen, M. and Feuerbacher, M. and Widmer, R. and Groening, O. and Fournee, V. and Dubois, J. M. and Ledieu, J.}
}

@Article { 204-2121,
   title = {Low temperature magnetic, galvanomagnetic and thermoelectric properties of type-I clathrate Ba8NixSi46-x},
   journal = {Physical Review B: Condensed Matter},
   year = {2011},
   volume = {83},
   pages = {205102},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux {\`a} propri{\'e}t{\'e}s thermo{\'e}lectriques},
   author = {CANDOLFI, C. and AYDEMIR, U. and ORMECI, A. and BAITINGER, M. and OESCHLER, N. and GRIN, YU. and STEGLICH, F.}
}

@Article { 204-2124,
   title = {Low temperature thermoelectric, galvanomagnetic and thermodynamic properties of the type-I clathrate Ba8AuxSi46-x},
   journal = {Physical Review B: Condensed Matter},
   year = {2011},
   volume = {84},
   pages = {195137},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux {\`a} propri{\'e}t{\'e}s thermo{\'e}lectriques},
   author = {AYDEMIR, U. and CANDOLFI, C. and ORMECI, A. and OZTAN, Y. and BAITINGER, M. and OESCHLER, N. and STEGLICH, F. and GRIN, YU.}
}

@Article { Hell:2011a,
   title = {Microstructure - Properties Relationships in Carbide-free Bainitic Steels},
   journal = {ISIJ International},
   year = {2011},
   volume = {51},
   number = {10},
   pages = {1724-1732},
   abstract = {We elaborated two carbide-free bainitic steels with different microstructures through specific alloy design and austempering process. Microstructural characterizations were performed by means of EBSD analysis and in-situ high energy synchrotron diffraction in order to evaluate the phase fractions and the carbon content in the retained austenite, as well as the microtextures. These microstructural features were correlated to the tensile properties. Both steels exhibited an excellent compromise between high strength (above 1 250 MPa), good ductility (uniform elongation up to 14\%) and high fracture strain (reduction of area up to 46\%). The volume fraction of MA blocks (blocks of retained austenite partially transformed into fresh martensite during the final cooling at room temperature) was a key relevant parameter that strongly influenced the work-hardening at the expense of the damaging processes at high strain.},
   note = {D{\'e}partement SI2M : Microstructures et Contraintes},
   ISSN = {0915-1559},
   author = {Hell, Jean-Christophe and Dehmas, Moukrane and Allain, Sebastien and Prado, Juscelino Mendes and Hazotte, Alain and Chateau, Jean-Philippe}
}

@Article { Napoli:2011,
   title = {Modeling of beta -> alpha transformation in complex titanium alloys.},
   journal = {Solid State Phenomena},
   year = {2011},
   volume = {172-174},
   pages = {1044-1049},
   note = {D{\'e}partement SI2M : Microstructures et Contraintes},
   author = {Di Napoli, P. and Appolaire, B. and Aeby-Gautier, E. and B{\'e}n{\'e}teau, A.}
}

@Article { 204-2123,
   title = {Multiband conduction in the type-I clathrate Ba8Ge43?3},
   journal = {Physical Review B: Condensed Matter},
   year = {2011},
   volume = {84},
   pages = {205118},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux {\`a} propri{\'e}t{\'e}s thermo{\'e}lectriques},
   author = {CANDOLFI, C. and ORMECI, A. and AYDEMIR, U. and BAITINGER, M. and OESCHLER, N. and STEGLICH, F. and GRIN, YU.}
}

@Article { 201-2061,
   title = {Nanoscience with non-equilibrium plasmas at atmospheric pressure},
   journal = {J. Phys. D: Appl. Phys.},
   year = {2011},
   volume = {44},
   pages = {363001},
   note = {D{\'e}partement CP2S : Exp{\'e}riences et Simulations des Plasmas R{\'e}actifs - Interaction plasma-surface et Traitement des Surfaces ESPRITS},
   author = {Belmonte, T. and Arnoult, G. and Henrion, G. and Gries, T.}
}

@Article { 201-2064,
   title = {NanoSIMS50 analyses of Ar/18O2 plasma-treated Escherichia coli bacteria},
   journal = {New journal of physics},
   year = {2011},
   volume = {13},
   pages = {113040},
   note = {D{\'e}partement CP2S : Exp{\'e}riences et Simulations des Plasmas R{\'e}actifs - Interaction plasma-surface et Traitement des Surfaces ESPRITS},
   author = {Clement, F. and Lecoq, E. and Duday, D. and Belmonte, T. and Audinot, J-N. and Lentzen, E. and Penny, C. and Cauchie, H-M. and Choquet, P.}
}

@Article { 208-1606,
   title = {New insight into indium electrochemistry in a Tf2N-based room-temperature ionic liquid},
   journal = {Electrochimica Acta},
   year = {2011},
   volume = {58},
   pages = {532-540},
   note = {D{\'e}partement CP2S : Chimie et {\'e}lectrochimie des mat{\'e}riaux},
   author = {Traore, Y. and Legeai, S. and Diliberto, S. and Arrachart, G. and Pellet-Rostaing, S. and Draye, M.}
}

@Article { Bernstein2011,
   title = {Nonuniform switching of the perpendicular magnetization in a spin-torque-driven magnetic nanopillar},
   journal = {Physical Review B - Condensed Matter and Materials Physics},
   year = {2011},
   volume = {83},
   number = {18},
   note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin},
   web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-79961161437\&partnerID=40\&md5=e9dcdf2877bbb9b1b33ce4c71826b7a9},
   author = {Bernstein, D.P. and Br{\"a}uer, B. and Kukreja, R. and St{\"o}hr, J. and Hauet, T. and Cucchiara, J. and Mangin, S. and Katine, J.A. and Tyliszczak, T. and Chou, K.W. and Acremann, Y.}
}

@Article { 201-1582,
   title = {On the origin of self-organization of SiO2 nanodots deposited by CVD enhanced by atmospheric pressure remote microplasma},
   journal = {Journal of Physics D-Applied Physics},
   year = {2011},
   volume = {44},
   number = {17},
   pages = {174022},
   note = {D{\'e}partement CP2S : Exp{\'e}riences et Simulations des Plasmas R{\'e}actifs - Interaction plasma-surface et Traitement des Surfaces ESPRITS},
   author = {Arnoult, G. and Belmonte, T. and Kosior, F. and Dossot, M. and Henrion, G.}
}

@Article { ISI:000289512700022,
   title = {On the origin of self-organization of SiO2 nanodots deposited by CVD enhanced by atmospheric pressure remote microplasma},
   journal = {JOURNAL OF PHYSICS D-APPLIED PHYSICS},
   year = {2011},
   volume = {44},
   number = {17},
   abstract = {The origin of organization of nanostructured silica coatings deposited on stainless steel substrates by remote microplasma at atmospheric pressure is investigated. We show by resorting to thermal camera measurements coupled with modelling that deposition, limited to a few seconds in time, occurs at low temperature (similar to below 420 K) although the gas temperature may reach 1400 K. Raman analyses of deposited films with thicknesses below 1 mu m show the presence of oxidized silicon bonded to the metallic surface. The origin of nanodots is explained as follows. Close to the microplasma nozzle, the concentration of oxidizing species and/or the temperature being high enough, a silica thin film is obtained, leading to ceramic-metallic oxide interface that leads to a Volmer-Weber growth mode and to the synthesis of 3D structures over long treatment times. Far from the nozzle, the reactivity decreasing, thin films get a plasma-polymer like behaviour which leads to a Franck-Van der Merwe growth mode and films with a higher density. Other nanostructures, made of hexagonal cells, are observed but remain unexplained.},
   note = {Centre de Comp{\'e}tences : ERMIONE informatique et calcul},
   publisher = {IOP PUBLISHING LTD},
   address = {TEMPLE CIRCUS, TEMPLE WAY, BRISTOL BS1 6BE, ENGLAND},
   type = {Article},
   language = {English},
   DOI = {10.1088/0022-3727/44/17/174022},
   author = {Arnoult, G. and Belmonte, T. and Kosior, F. and Dossot, M. and Henrion, G.}
}

@Article { 205-1840,
   title = {Optimization of hydrogen storage capacity onto activated carbons},
   journal = {International journal of hydrogen energy},
   year = {2011},
   volume = {36},
   pages = {11746-11751},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux Carbon{\'e}s},
   author = {Zhao, W. and Fierro, V. and Aylon, E. and Izquierdo, m.T. and Celzard, A.}
}

@Article { 205-1832,
   title = {Porosity of resorcinol-formaldehyde organic and carbon aerogels exchanged and dried with supercritical organic solvents},
   journal = {Materials Chemistry and Physics},
   year = {2011},
   volume = {129},
   pages = {1221-1232},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux Carbon{\'e}s},
   author = {Szczurek, A. and Amaral-Labat, G. and Fierro, V. and Pizzi, A. and Masson, E. and Celzard, A.}
}

@Article { Settefrati:2011,
   title = {Precipitation in a near beta titanium alloy on ageing: Influence of heating rate and chemical composition of the beta-metastable phase},
   journal = {Solid State Phenomena},
   year = {2011},
   volume = {172-174},
   number = {Part 1},
   pages = {760-765},
   abstract = {In the present study we focus on the precipitation processes during heating and ageing of beta-metastable phase in the near beta Ti-5553 alloy. Transformation processes have been studied using continuous high energy X-Ray Diffraction (XRD) and electrical resistivity for two different states of the beta-metastable phase. Microstructures have been observed by electron microscopy. Different transformation sequences are highlighted depending on both heating rate and chemical composition of the beta-metastable phase. At low temperatures and low heating rates, the hexagonal omega(iso) phase is first formed as generally mentioned in the literature. Increasing the temperature, XRD evidences the formation of an orthorhombic phase (alpha''), which evolves toward the hexagonal pseudo compact alpha phase. For higher heating rates or for richer composition in beta-stabilizing elements of the beta-metastable phase, omega phase may not form and alpha'' forms directly and again transforms into alpha phase. A direct transformation from beta-metastable to alpha phase is observed for the highest heating rate. The formation of the metastable omega(iso) and alpha'' phases clearly influences the final morphology of alpha.},
   note = {D{\'e}partement SI2M : Microstructures et Contraintes},
   editor = {Brechet, Y and Clouet, E and Deschamps, A and Finel, A and Soisson, F},
   booktitle = {SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIALS, PTS 1-2},
   organization = {Mat \& Process Sci \& Engn Lab; CEA, Tranverse Programme Adv Mat; French Aerospace Lab; Inst Chem, Natl Ctr Sci Res; French Phase Field Network; Lab Etude Microstructures},
   ISSN = {1012-0394},
   DOI = {10.4028/www.scientific.net/SSP.172-174.760},
   author = {Settefrati, A. and Aeby-Gautier, E. and Dehmas, M. and Geandier, G. and Appolaire, B. and Audion, S. and Delfosse, J.}
}

@Article { 202-2077,
   title = {Process parameter dependent structural, electrical and optical properties of reactive magnetron sputtered Ag-Cu-O films},
   journal = {Journal of Nanotechnology},
   year = {2011},
   volume = {2011},
   pages = {986021},
   note = {D{\'e}partement CP2S : Elaboration et Fonctionnalit{\'e} de Couches Minces},
   author = {REDDY, NARAYANA and ADEM, SREEDHAR and HARI PRASAD REDDY, M and Uthanna, S. and Pierson, J.F.}
}

@Article { 204-2126,
   title = {Promising thermoelectric properties in AgxMo9Se11 compounds (3.4 ? x ? 3.9)},
   journal = {Appied physics letters},
   year = {2011},
   volume = {98},
   pages = {162106},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux {\`a} propri{\'e}t{\'e}s thermo{\'e}lectriques},
   author = {ZHOU, T. and LENOIR, B. and COLIN, M. and DAUSCHER, A. and AL RAHAL AL ORABI, R. and GOUGEON, P. and POTEL, M. and GUILMEAU, E.}
}

@Article { 203-2103,
   title = {Pseudomorphy, surface alloys and role of the elementary clusters on the domain orientations in the Cu/Al13Co4(100) system.},
   journal = {J. Phys. Condens. Mat.},
   year = {2011},
   volume = {23},
   pages = {435009},
   note = {D{\'e}partement CP2S : M{\'e}tallurgie et Surfaces},
   ISSN = {0953-8984},
   author = {Addou, R. and SHUKLA, A. K. and de Weerd, M.C. and Gille, P. and Groening, O. and Fournee, V. and Dubois, J. M. and Ledieu, J.}
}

@Article { 207-2165,
   title = {Repairing Corroded RC beam with near-surface mounted CFRP rods},
   journal = {Materials and Structures},
   year = {2011},
   volume = {44},
   number = {7},
   pages = {1205-1217},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux pour le G{\'e}nie Civil},
   author = {KREIT, A. and AL-MAHMOUD, F. and CASTEL, A. and FRANCOIS, R.}
}

@Article { 202-2073,
   title = {Self supported nickel antimonides based electrode for Li ion battery},
   journal = {Solid State Ionics},
   year = {2011},
   volume = {192},
   pages = {298-303},
   note = {D{\'e}partement CP2S : Elaboration et Fonctionnalit{\'e} de Couches Minces},
   author = {Villevieille, C. and Ionica-Bousquet, C.M. and ADE BENEDETTI, A and Morato, F. and Pierson, J.F. and Simon, P. and Monconduit, L.}
}

@Article { 202-2087,
   title = {Spectral evidence of spinodal decomposition, phase transformation and molecular nitrogen formation in supersaturated TiAlN films upon annealing},
   journal = {Acta Materialia},
   year = {2011},
   volume = {59},
   pages = {6287-6296},
   note = {D{\'e}partement CP2S : Elaboration et Fonctionnalit{\'e} de Couches Minces},
   author = {Endrino, J.L. and ARHAMMAR, C. and GUTIERREZ, A. and Gago, R. and Horwat, D. and SORIANO, L. and FOX-RABINOVICH, G. and MARTIN, D. and MARERO, Y and Guo, J. and RUBENSSON, J.E. and Andersson, J.}
}

@Article { 203-2100,
   title = {Structural investigation of the (001) surface of the Al9Co2 complex metallic alloy.},
   journal = {J. Physical Chemistry C},
   year = {2011},
   volume = {115},
   pages = {14922{\^a}??14932},
   note = {D{\'e}partement CP2S : M{\'e}tallurgie et Surfaces},
   author = {ALARCON-VILLESECA, S. and Ledieu, J. and SERKOVIC-LOLI, L. N. and de WEERD, M.-C. and Gille, P. and Fournee, V. and Dubois, J.M. and GAUDRY., {\~A}?.}
}

@Article { 203-2101,
   title = {Structure of the orthorhombic Al13Co4(100) surface using LEED and ab initio studies.},
   journal = {Physical Review B},
   year = {2011},
   volume = {84},
   pages = {085411},
   note = {D{\'e}partement CP2S : M{\'e}tallurgie et Surfaces},
   author = {SHIN, H. and PUSSI, K. and Gaudry, E. and Ledieu, J. and Fournee, V. and ALARCON-VILLESECA, S. and Gille, P. and MORITZ, W. and DIEHL, R. D.}
}

@Article { 205-1018,
   title = {Tannin {\^a}?? resorcinol {\^a}?? formaldehyde carbon cryogels},
   journal = {Carbon},
   year = {2011},
   volume = {in press},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux Carbon{\'e}s},
   author = {Szczurek, A and Amaral-Labat, G and Fierro, V and Pizzi, A and Celzard, A}
}

@Article { 205-1837,
   title = {The use of tannin for preparing carbon gels. Part I. Carbon aerogels},
   journal = {Carbon},
   year = {2011},
   volume = {49},
   pages = {2773-2784},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux Carbon{\'e}s},
   author = {Szczurek, A. and Amaral-Labat, G. and Fierro, V. and Pizzi, A. and Masson, E. and Celzard, A.}
}

@Article { 205-1838,
   title = {The use of tannin for preparing carbon gels. Part II. Carbon cryogels},
   journal = {Carbon},
   year = {2011},
   volume = {49},
   pages = {2785-2794},
   note = {D{\'e}partement CP2S : Mat{\'e}riaux Carbon{\'e}s},
   author = {Szczurek, A. and Amaral-Labat, G. and Fierro, V. and Pizzi, A. and Celzard, A.}
}

@Article { 201-2049,
   title = {Video tracking and post-mortem analysis of dust particles from all tungsten ASDEX-Upgrade},
   journal = {Journal of Nuclear Materials},
   year = {2011},
   volume = {415},
   pages = {S1085-S1088},
   note = {D{\'e}partement CP2S : Exp{\'e}riences et Simulations des Plasmas R{\'e}actifs - Interaction plasma-surface et Traitement des Surfaces ESPRITS},
   author = {Endstrasser, N. and Brochard, F. and Rohde, V. and Balden, M. and Lunt, T. and Bardin, S. and Brian\c{c}on, J-L. and Neu, R. and Team and ASDEX Upgrade, the}
}