% % This file was created by the TYPO3 extension % bib % --- Timezone: CET % Creation date: 2021-01-25 % Creation time: 02-34-31 % --- Number of references % 50 % @Article { ISI:000315834800005, title = {Arc Behaviour and Cathode Melting Process during VAR: an Experimental and Numerical Study}, journal = {ISIJ INTERNATIONAL}, year = {2013}, volume = {53}, number = {2}, pages = {213-220}, abstract = {The present study aims to understand the melting of the consumable electrode in the VAR process and gain some insight into the influence of an ensemble arc motion on the melting behaviour. In a previous study, a 2D axisymmetric model of the heat transfer in the cathode had been developed. Using the operating parameters as model inputs, it enabled prediction of the melt rate and the evolution of the melting area. Model results were successfully compared to melt rate measurements in an industrial VAR furnace. In recent years, it has been claimed that the electric arc may not be considered as steady and axisymmetric. Our experimental investigation of the luminosity recorded during an actual VAR heat confirms that a transient 3D behaviour may take place. Therefore, a 3D version of the previous model was set up to predict the heat transfer and melting of the electrode, using the unknown ensemble arc motion as an input. The arc is assimilated to a transient distribution of energy flux density. Results evidence that the influence of the arc motion on the shape of the electrode tip can be very important. In industrial practice, the cathode tip usually remains relatively flat during melting. The shapes of the computed electrode tips enable us to propose some arc parameters which remain compatible with both the periodic behaviour of the light emitted and the flatness of the electrode.}, note = {Centre de Comp{\'e}tences : ERMIONE informatique et calcul}, ISSN = {0915-1559}, DOI = {10.2355/isijinternational.53.213}, author = {Jardy, Alain and Chapelle, Pierre and Malik, Ashish and Bellot, Jean-Pierre and Combeau, Herve and Dussoubs, Bernard} } @Article { ISI:000324827200023, title = {Cation size effect on the thermochromic properties of rare earth cobaltites RECoO3 (RE: La, Nd, Sm)}, journal = {JOURNAL OF APPLIED PHYSICS}, year = {2013}, volume = {114}, note = {Centre de Comp{\'e}tences : X-Gamma rayons X et spectroscopie}, ISSN = {0021-8979}, DOI = {10.1063/1.4821884}, author = {Capon, F. and BOILEAU, A. and Carteret, C. and Martin, N. and Boulet, P. and Pierson, J. F.} } @Article { Rougemaille2013, title = {Chiral nature of magnetic monopoles in artificial spin ice}, journal = {New Journal of Physics}, year = {2013}, volume = {15}, note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84875826422\&partnerID=40\&md5=b49f7aed36833edb847643b698afd109}, author = {Rougemaille, N. and Montaigne, F. and Canals, B. and Hehn, M. and Riahi, H. and Lacour, D. and Toussaint, J.-C.} } @Article { ISI:000324049000004, title = {Competing charge ordering and Mott phases in a correlated Sn/Ge(111) two-dimensional triangular lattice}, journal = {PHYSICAL REVIEW B}, year = {2013}, volume = {88}, number = {12}, note = {D{\'e}partement P2M : Surfaces et Spectroscopies}, ISSN = {1098-0121}, DOI = {10.1103/PhysRevB.88.125113}, author = {Cortes, R. and Tejeda, A. and Lobo-Checa, J. and Didiot, C. and Kierren, B. and Malterre, D. and Merino, J. and Flores, F. and Michel, E. G. and Mascaraque, A.} } @Article { Pushkareva:2013, title = {Distribution of Carbon in Martensite During Quenching and Tempering of Dual Phase Steels and Consequences for Damage Properties.}, journal = {ISIJ International}, year = {2013}, volume = {53}, pages = {1215-1223}, note = {D{\'e}partement SI2M : Microstructures et Contraintes}, DOI = {10.2355/isijinternational.53.1215}, author = {Pushkareva, I. and Scott, C. and Goune, M. and Valle, N. and Redja{\"i}mia, A. and Moulin, A} } @Article { ISI:000325342500026, title = {Effect of deposition conditions on the stoichiometry and structural properties of LiNbO3 thin films deposited by MOCVD}, year = {2013}, volume = {8626}, note = {Centre de Comp{\'e}tences : X-Gamma rayons X et spectroscopie}, editor = {Teherani, FH and Look, DC and Rogers, DJ}, ISSN = {0277-786X}, DOI = {10.1117/12.2010105}, author = {Margueron, Samuel and Bartasyte, Ausrine and Plausinaitiene, Valentina and Abrutis, Adulfas and Boulet, Pascal and Kubilius, Virgaudas and Saltyte, Zita} } @Article { ISI:000329462800004, title = {Effect of Symmetry Breaking on Electronic Band Structure: Gap Opening at the High Symmetry Points}, journal = {SYMMETRY-BASEL}, year = {2013}, volume = {5}, number = {4}, pages = {344-354}, note = {D{\'e}partement P2M : Surfaces et Spectroscopies}, ISSN = {2073-8994}, DOI = {10.3390/sym5040344}, author = {Vasseur, Guillaume and Fagot-Revurat, Yannick and Kierren, Bertrand and Sicot, Muriel and Malterre, Daniel} } @Article { 201-3774, title = {Effects of electrical parameters on the plasma electrolytic oxidation of aluminium}, journal = {Surface and Coatings Technology}, year = {2013}, volume = {221}, pages = {70}, abstract = {The plasma electrolytic oxidation (PEO) of aluminium alloys is investigated for different electrical working conditions using a pulsed bipolar current supply. A particular attention is paid to the effect of the anodic current density (from 10 to 90 A dm-2) and current pulse frequency (from 100 to 900 Hz) on the resulting oxide layer. Micro-discharges are characterized during the process by means of fast video imaging with a time and a space resolution of 8 {\^I}¼s and 0.017 mm2, respectively. Correlations are established between themicro-discharge characteristics (surface density, lifetime and size) and the elaborated oxide layers (morphology, growth rate and surface roughness). The highest coating growth rate measured (2.1 {\^I}¼m min-1) is achieved with the combination of the highest current density (75.7 A dm-2) and the highest current pulse frequency (900 Hz). Within these specific current conditions it is concluded that the detrimental effects of numerous micro-discharges are minimized. The results also show that the surface roughness may be largely affected by the presence of long-lived and large micro-discharges which develop over the processed surface. The strongest micro-discharges (live duration up to 0.3 ms and cross-sectional area up to 1 mm2) are mainly observed with the combination of the highest current density (75.7 A dm-2) and the lowest current pulse frequency (100 Hz).}, note = {D{\'e}partement CP2S : Exp{\'e}riences et Simulations des Plasmas R{\'e}actifs - Interaction plasma-surface et Traitement des Surfaces ESPRITS}, DOI = {http://dx.doi.org/10.1016/j.surfcoat.2013.01.029}, author = {Martin, J. and Melhem, A. and Shchedrina, I. and Duchanoy, T. and Nomin{\'e}, A. and Henrion, G. and Czerwiec, T. and Belmonte, T.} } @Article { ISI:000315145900017, title = {Electron hopping at the Si(111):B-root 3 surface: Insight from local impurity spectroscopy}, journal = {PHYSICAL REVIEW B}, year = {2013}, volume = {87}, number = {7}, note = {D{\'e}partement P2M : Surfaces et Spectroscopies}, ISSN = {1098-0121}, DOI = {10.1103/PhysRevB.87.075427}, author = {Tournier-Colletta, C. and Kierren, B. and Fagot-Revurat, Y. and Malterre, D.} } @Article { Riahi2013, title = {Energy levels of interacting curved nanomagnets in a frustrated geometry: Increasing accuracy when using finite difference methods}, journal = {Journal of Physics Condensed Matter}, year = {2013}, volume = {25}, number = {29}, note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84879863892\&partnerID=40\&md5=25ddf2bb32fe24df35ebe11a5e02b47d}, author = {Riahi, H. and Montaigne, F. and Rougemaille, N. and Canals, B. and Lacour, D. and Hehn, M.} } @Article { Melchior2013, title = {Energy-resolved magnetic domain imaging in TbCo alloys by valence band photoemission magnetic circular dichroism}, journal = {Physical Review B - Condensed Matter and Materials Physics}, year = {2013}, volume = {88}, number = {10}, note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84884866863\&partnerID=40\&md5=2a0167f587bb7ba10893fc9a287dca61}, author = {Melchior, P. and Rollinger, M. and Thielen, P. and Alebrand, S. and Bierbrauer, U. and Schneider, C. and Gottwald, M. and Hehn, M. and Mangin, S. and Cinchetti, M. and Aeschlimann, M.} } @Article { Riahi2013, title = {Erratum: Energy levels of interacting curved nanomagnets in a frustrated geometry: Increasing accuracy when using finite difference methods (Journal of Physics Condensed Matter (2013) 25 (296001))}, journal = {Journal of Physics Condensed Matter}, year = {2013}, volume = {25}, number = {33}, note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84881184641\&partnerID=40\&md5=4cbba560a1dcc83ef2f7e5a35268c004}, author = {Riahi, H. and Montaigne, F. and Rougemaille, N. and Canals, B. and Lacour, D. and Hehn, M.} } @Article { 201-3791, title = {ESTELL: a quasi-Toroidally Symmetric Stellarator}, journal = {Contributions to Plasma Physics}, year = {2013}, volume = {53}, pages = {459-468}, abstract = {This work presents the physics design for a simple quasi-axially symmetric stellarator. A plasma configuration described by a modest number of Fourier coefficients was found to establish this symmetry with good accuracy. The low rotational transform results in a relatively simple coil set exhibiting low curvatures and comfortable clearance between adjacent coils. As another consequence, the maximum achievable plasma pressure will be limited to about 0.5\%. An experiment along the lines proposed would allow an exploration of the confinement properties of a quasi-axially symmetric configuration. ((c) 2013 WILEY-VCH Verlag GmbH \& Co. KGaA, Weinheim)}, note = {D{\'e}partement CP2S : Exp{\'e}riences et Simulations des Plasmas R{\'e}actifs - Interaction plasma-surface et Traitement des Surfaces ESPRITS}, DOI = {http://dx.doi.org/10.1002/ctpp.201200055}, author = {Drevlak, M. and Brochard, F. and Helander, P. and Kisslinger, J. and Mikhailov, M. and N{\"u}hrenberg, C. and N{\"u}hrenberg, J. and Turkin, Y.} } @Article { ISI:000318556100019, title = {Identification of LiNbO3, LiNb3O8 and Li3NbO4 phases in thin films synthesized with different deposition techniques by means of XRD and Raman spectroscopy}, journal = {JOURNAL OF PHYSICS-CONDENSED MATTER}, year = {2013}, volume = {25}, note = {Centre de Comp{\'e}tences : X-Gamma rayons X et spectroscopie}, ISSN = {0953-8984}, DOI = {10.1088/0953-8984/25/20/205901}, author = {Bartasyte, Ausrine and Plausinaitiene, Valentina and Abrutis, Adulfas and Stanionyte, Sandra and Margueron, Samuel and Boulet, Pascal and Kobata, T. and Uesu, Yoshiaki and Gleize, Jerome} } @Article { 201-2769, title = {Impacts created on various materials by micro-discharges in heptane: influence of the dissipated charge}, journal = {Journal of Applied Physics}, year = {2013}, volume = {113}, pages = {043301}, abstract = {Modes of energy dissipation in impacts made on various materials (Al, Cu, Fe, and Si) by discharges in heptane are investigated for micro-gap conditions. Bulk metals and thin films of 300 nm in thickness deposited on silicon wafers are used as samples. Positive high voltage pulses with nanosecond rise times make it possible to isolate a single discharge and to study the way the charge delivered by the power supply is transferred to the larger electrode (the sample) in a pin-to-plate configuration. The diameter of the impacts created by the plasma varies linearly versus the charge raised at a power close to 0.5. However, the exact value of the power depends on the material. We also show how the impact morphologies change with the applied charge. At high charges, the diameters of impacts on thin films behave as those made on silicon. At low charges, they behave as the bulk material. Finally, we show that the energy dissipated in impacts is below a few percent.}, note = {D{\'e}partement CP2S : Exp{\'e}riences et Simulations des Plasmas R{\'e}actifs - Interaction plasma-surface et Traitement des Surfaces ESPRITS}, DOI = {http://dx.doi.org/10.1063/1.4780786}, author = {Hamdan, A. and Audinot, J.-N. and Migot-Choux C. No{\~A}«l, S. and Henrion, G. and Belmonte, T.} } @Article { Geandier:2013, title = {In situ structural evolution of steel-based MMC by high energy X-ray diffraction and comparison with finite element modelling micromechanical approach}, journal = {Materials Science Forum}, year = {2013}, volume = {768-769}, pages = {313-320}, note = {D{\'e}partement SI2M : Microstructures et Contraintes}, DOI = {10.4028/www.scientific.net/MSF.768-769.313}, author = {Geandier, G. and Dehmas, M. and Mourot, M. and Aeby-Gautier, E. and Denis, S. and Martin, O. and Karnatak, N.} } @Article { Devynck:2013, title = {Influence of the impact angle and the direction against gravity on heat transfer during the cooling of a cylinder by a free planar subcooled impinging jet.}, journal = {Key Engineering Materials}, year = {2013}, volume = {554--557}, pages = {1530--1538}, note = {D{\'e}partement SI2M : Microstructures et Contraintes}, DOI = {10.4028/www.scientific.net/KEM.554-557.1530}, author = {Devynck, S. and Gradeck, M. and Bellot, J.P. and Denis, S. and Maigrat, G. and Varlez, M. and Benard, T.} } @Article { ISI:000330016900081, title = {Insight into Organometallic Intermediate and Its Evolution to Covalent Bonding in Surface-Confined Ullmann Polymerization}, journal = {ACS NANO}, year = {2013}, volume = {7}, number = {9}, pages = {8190-8198}, note = {D{\'e}partement P2M : Surfaces et Spectroscopies}, ISSN = {1936-0851}, DOI = {10.1021/nn4035684}, author = {Di Giovannantonio, Marco and El Garah, Mohamed and Lipton-Duffin, Josh and Meunier, Vincent and Cardenas, Luis and Revurat, Yannick Fagot and Cossaro, Albano and Verdini, Alberto and Perepichka, Dmitrii F. and Rosei, Federico and Contini, Giorgio} } @Article { ISI:000325367100003, title = {Interaction of Discharges in Heptane with Silicon Covered by a Carpet of Carbon Nanotubes}, journal = {ADVANCED ENGINEERING MATERIALS}, year = {2013}, volume = {15}, number = {10}, pages = {885-892}, abstract = {Discharges in heptane in pin-to-plate configuration are produced between a platinum wire and a (100)-oriented silicon wafer coated by a carbon nanotube (CNT) carpet. This carpet is used to simulate the behavior of a nanostructured surface in electro-discharge machining (EDM) where small protrusions on the surface could play a similar role. CNTs behave like simple electrical conductors between the discharge and the silicon wafer. They act as if they would focus the current on smaller areas. The average diameter of impacts is about five times smaller if the silicon wafer is coated by a CNT carpet. The underlying silicon surface is heated by the plasma and melts, forming a central spot surrounded by a serrated trailing edge. The current density being about one order of magnitude larger when a CNT carpet is present, the induced magnetic field stirs the molten silicon, creating serrations all around the impact. Hot nanoparticles of carbon coming from the plasma fall and roll randomly on the silicon surface where they create wavy micro-channels. Nanowires that are detached from the surface are covered by nanoparticles of platinum in the plasma and embedded within an amorphous carbon layer deposited on the nanotube. However, these effects can only be observed if the current density is high enough (>approximate to 10A mu m(-2) depending on the material) like in micro-EDM but not in nano-EDM.}, affiliation = {Hamdan, A (Reprint Author), Univ Lorraine, Inst Jean Lamour, CNRS, UMR 7198, F-54042 Nancy, France. Hamdan, Ahmad; Migot-Choux, Sylvie; Noel, Cedric; Kosior, Francis; Henrion, Gerard; Belmonte, Thierry, Univ Lorraine, Inst Jean Lamour, CNRS, UMR 7198, F-54042 Nancy, France. Audinot, Jean-Nicolas, Ctr Rech Publ Gabriel Lippmann, SAM Dept, L-4422 Belvaux, Luxembourg.}, note = {Centre de Comp{\'e}tences : ERMIONE informatique et calcul}, publisher = {WILEY-V C H VERLAG GMBH}, address = {BOSCHSTRASSE 12, D-69469 WEINHEIM, GERMANY}, type = {Article}, language = {English}, ISSN = {1438-1656}, DOI = {10.1002/adem.201300106}, author = {Hamdan, Ahmad and Audinot, Jean-Nicolas and Migot-Choux, Sylvie and Noel, Cedric and Kosior, Francis and Henrion, Gerard and Belmonte, Thierry} } @Article { 201-3777, title = {Interaction of Discharges in Heptane with Silicon Covered by a Carpet of Carbon Nanotubes,}, journal = {Advanced Engineering Materials}, year = {2013}, volume = {15}, pages = {885-892}, abstract = {Discharges in heptane in pin-to-plate configuration are produced between a platinum wire and a (100)-oriented silicon wafer coated by a carbon nanotube (CNT) carpet. This carpet is used to simulate the behavior of a nanostructured surface in electro-discharge machining (EDM) where small protrusions on the surface could play a similar role. CNTs behave like simple electrical conductors between the discharge and the silicon wafer. They act as if they would focus the current on smaller areas. The average diameter of impacts is about five times smaller if the silicon wafer is coated by a CNT carpet. The underlying silicon surface is heated by the plasma and melts, forming a central spot surrounded by a serrated trailing edge. The current density being about one order of magnitude larger when a CNT carpet is present, the induced magnetic field stirs the molten silicon, creating serrations all around the impact. Hot nanoparticles of carbon coming from the plasma fall and roll randomly on the silicon surface where they create wavy micro-channels. Nanowires that are detached from the surface are covered by nanoparticles of platinum in the plasma and embedded within an amorphous carbon layer deposited on the nanotube. However, these effects can only be observed if the current density is high enough (>approximate to 10A mu m(-2) depending on the material) like in micro-EDM but not in nano-EDM.}, note = {D{\'e}partement CP2S : Exp{\'e}riences et Simulations des Plasmas R{\'e}actifs - Interaction plasma-surface et Traitement des Surfaces ESPRITS}, DOI = {http://dx.doi.org/10.1002/adem.201300106}, author = {Hamdan, A. and Audinot, J.-N. and Migot-Choux, S. and Noel, C. and Kosior, F. and Henrion, G. and Belmonte, T.} } @Article { Lu2013, title = {Interfacial trapping for hot electron injection in silicon}, journal = {Applied Physics Letters}, year = {2013}, volume = {103}, number = {2}, note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84880475078\&partnerID=40\&md5=b00d9fdada7fce71fc7dc6fbe33054c7}, author = {Lu, Y. and Lacour, D. and Lengaigne, G. and Le Gall, S. and Suire, S. and Montaigne, F. and Hehn, M.} } @Article { Lu2013, title = {Interfacial trapping for hot electron injection in silicon}, journal = {Applied Physics Letters}, year = {2013}, volume = {103}, number = {2}, note = {Centre de Comp{\'e}tences : MiNaLor micro et nanotechnologies}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84880475078\&partnerID=40\&md5=b00d9fdada7fce71fc7dc6fbe33054c7}, author = {Lu, Y. and Lacour, D. and Lengaigne, G. and Le Gall, S. and Suire, S. and Montaigne, F. and Hehn, M.} } @Article { Briones2013, title = {Large area patterned magnetic films by depositing cobalt layers on nano-wrinkled polydimethylsiloxane templates}, journal = {Applied Physics Letters}, year = {2013}, volume = {103}, number = {7}, note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84882394652\&partnerID=40\&md5=12fb71b0f8a8a9bb4ea68d662d561136}, author = {Briones, J. and Toro, P. and Encinas, A. and Caballero, L. and Denardin, J.C. and Melo, F. and Cerda, E. and Robert, S. and Lacour, D. and Montaigne, F.} } @Article { ISI:000323769000050, title = {Large area patterned magnetic films by depositing cobalt layers on nano-wrinkled polydimethylsiloxane templates}, journal = {APPLIED PHYSICS LETTERS}, year = {2013}, volume = {103}, note = {Centre de Comp{\'e}tences : X-Gamma rayons X et spectroscopie}, ISSN = {0003-6951}, DOI = {10.1063/1.4818677}, author = {Briones, J. and Toro, P. and Encinas, A. and Caballero, L. and Denardin, J. C. and Melo, F. and Cerda, E. and Robert, S. and Lacour, D. and Montaigne, F.} } @Article { Rajanikanth2013, title = {Magnetic anisotropy modified by electric field in V/Fe/MgO(001)/Fe epitaxial magnetic tunnel junction}, journal = {Applied Physics Letters}, year = {2013}, volume = {103}, number = {6}, note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84881658211\&partnerID=40\&md5=fad5a7487bea9bafd8dc17dfe913b5c7}, author = {Rajanikanth, A. and Hauet, T. and Montaigne, F. and Mangin, S. and Andrieu, S.} } @Article { Rajanikanth2013, title = {Magnetic anisotropy modified by electric field in V/Fe/MgO(001)/Fe epitaxial magnetic tunnel junction}, journal = {Applied Physics Letters}, year = {2013}, volume = {103}, number = {6}, note = {Centre de Comp{\'e}tences : MiNaLor micro et nanotechnologies}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84881658211\&partnerID=40\&md5=fad5a7487bea9bafd8dc17dfe913b5c7}, author = {Rajanikanth, A. and Hauet, T. and Montaigne, F. and Mangin, S. and Andrieu, S.} } @Article { 201-4379, title = {Microstructural characterization of the expanded austenite formed on the plasma nitride AISI 316L steel}, journal = {Mat{\'e}riaux et Techniques}, year = {2013}, volume = {101}, pages = {204}, note = {D{\'e}partement CP2S : Exp{\'e}riences et Simulations des Plasmas R{\'e}actifs - Interaction plasma-surface et Traitement des Surfaces ESPRITS}, DOI = {http://dx.doi.org/10.1051/mattech/2013064}, author = {Keddam, M. and Marcos, G. and Thiriet, T. and Czerwiec, T. and Michel, H.} } @Article { ISI:000319568800008, title = {Near-room temperature single-domain epitaxy of reactively sputtered ZnO films}, journal = {JOURNAL OF PHYSICS D-APPLIED PHYSICS}, year = {2013}, volume = {46}, note = {Centre de Comp{\'e}tences : X-Gamma rayons X et spectroscopie}, ISSN = {0022-3727}, DOI = {10.1088/0022-3727/46/23/235107}, author = {Chamorro, W. and Horwat, D. and Pigeat, P. and Miska, P. and Migot, S. and SOLDERA, F. and Boulet, P. and MUECKLICH, F.} } @Article { ISI:000314881900006, title = {New insight into the structure of saturated chlorine layer on Ag(111): LT-STM and DFT study}, journal = {APPLIED SURFACE SCIENCE}, year = {2013}, volume = {267}, pages = {21-25}, note = {D{\'e}partement P2M : Surfaces et Spectroscopies}, ISSN = {0169-4332}, DOI = {10.1016/j.apsusc.2012.04.150}, author = {Andryushechkin, B. V. and Cherkez, V. V. and Gladchenko, E. V. and Zhidomirov, G. M. and Kierren, B. and Fagot-Revurat, Y. and Malterre, D. and Eltsov, K. N.} } @Article { ISI:000323715500007, title = {Nonpareil Yb Behavior in YbMn6Ge6-xSnx}, journal = {PHYSICAL REVIEW LETTERS}, year = {2013}, volume = {111}, number = {9}, note = {D{\'e}partement P2M : Surfaces et Spectroscopies}, ISSN = {0031-9007}, DOI = {10.1103/PhysRevLett.111.096402}, author = {Mazet, T. and Malterre, D. and FRAN{\~A}?OIS, M. and Dallera, C. and Grioni, M. and Monaco, G.} } @Article { Sukhostavets2013, title = {Probing the anharmonicity of the potential well for a magnetic vortex core in a nanodot}, journal = {Physical Review Letters}, year = {2013}, volume = {111}, number = {24}, note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84890287937\&partnerID=40\&md5=cdbe7fcb95123b33be42e3008f59b4e2}, author = {Sukhostavets, O.V. and Pigeau, B. and Sangiao, S. and De Loubens, G. and Naletov, V.V. and Klein, O. and Mitsuzuka, K. and Andrieu, S. and Montaigne, F. and Guslienko, K.Y.} } @Article { Sukhostavets2013, title = {Probing the anharmonicity of the potential well for a magnetic vortex core in a nanodot}, journal = {Physical Review Letters}, year = {2013}, volume = {111}, number = {24}, note = {Centre de Comp{\'e}tences : MiNaLor micro et nanotechnologies}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84890287937\&partnerID=40\&md5=cdbe7fcb95123b33be42e3008f59b4e2}, author = {Sukhostavets, O.V. and Pigeau, B. and Sangiao, S. and De Loubens, G. and Naletov, V.V. and Klein, O. and Mitsuzuka, K. and Andrieu, S. and Montaigne, F. and Guslienko, K.Y.} } @Article { Lambert2013, title = {Quantifying perpendicular magnetic anisotropy at the Fe-MgO(001) interface}, journal = {Applied Physics Letters}, year = {2013}, volume = {102}, number = {12}, note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84875938232\&partnerID=40\&md5=34c92e2f1215b6fdf8bb1dcac1ffa5b7}, author = {Lambert, C.-H. and Rajanikanth, A. and Hauet, T. and Mangin, S. and Fullerton, E.E. and Andrieu, S.} } @Article { 201-4180, title = {Real-time Raman spectroscopy measurements to study the uniaxial tension of isotactic polypropylene{\^A} : a global overview of microstructural deformation mechanisms}, journal = {Journal of Raman Spectroscopy}, year = {2013}, volume = {44}, number = {5}, pages = {776-784}, abstract = {Micro-Raman spectroscopy was used to investigate the main deformation micromechanisms of isotactic polypropylene uniaxially stretched at constant temperature (T=30 degrees C) under a constant true strain rate (epsilon.zz = 5.103s1). To accurate measurements namely to be free of the recovering phenomenon which causes in most of the cases interference during post-mortem analysis, we introduced a new experimental setup combining a Raman spectrometer with a tensile machine piloted by the VideoTraction system. Microstructure is described by essential parameters such as the crystallinity index, the macromolecular orientation both in the crystalline and the amorphous phase, and distribution of the internal stress at the chemical bonds scale. For each, a well-tried Raman spectral criterion was used. Cross-checking of these results, obtained with a minimum of tensile tests, allows a more complete understanding of the deformation micromechanisms of semi-crystalline polymer. Copyright (c) 2013 John Wiley \& Sons, Ltd.}, note = {D{\'e}partement CP2S : Exp{\'e}riences et Simulations des Plasmas R{\'e}actifs - Interaction plasma-surface et Traitement des Surfaces ESPRITS}, DOI = {http://dx.doi.org/10.1002/jrs.4244}, author = {Martin, J. and Pon\c{c}ot, M. and M. Hiver, J. and Bourson, P. and Dahoun, A.} } @Article { Mercier2013790, title = {Selective removal of metal impurities from single walled carbon nanotube samples}, journal = {New Journal of Chemistry}, year = {2013}, volume = {37}, number = {3}, pages = {790-795}, note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84874091228\&partnerID=40\&md5=cb042fda4868e8defce23d523873e3b1}, author = {Mercier, G. and Herold, C. and Mar{\^e}ch{\'e}, J.-F. and Cahen, S. and Gleize, J. and Ghanbaja, J. and Lamura, G. and Bellouard, C. and Vigolo, B.} } @Article { ISI:000327812700036, title = {Self-Organization of Gold Chloride Molecules on Au(111) Surface}, journal = {JOURNAL OF PHYSICAL CHEMISTRY C}, year = {2013}, volume = {117}, number = {47}, pages = {24948-24954}, note = {D{\'e}partement P2M : Surfaces et Spectroscopies}, ISSN = {1932-7447}, DOI = {10.1021/jp409258z}, author = {Andryushechkin, Boris V. and Cherkez, Vladimir V. and Gladchenko, Eugeny V. and Pavlova, Tatiana V. and Zhidomirov, Georgy M. and Kierren, Bertrand and Didiot, Clement and Fagot-Revurat, Yannick and Malterre, Daniel and Eltsov, Konstantin N.} } @Article { McCord2013, title = {Separation of low- and high-temperature contributions to the exchange bias in Ni81Fe19-NiO thin films}, journal = {Physical Review B - Condensed Matter and Materials Physics}, year = {2013}, volume = {88}, number = {1}, note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84880769033\&partnerID=40\&md5=47274bc59c9fc38ce0cc2241077e1f62}, author = {McCord, J. and Mangin, S.} } @Article { Cascales20134347, title = {Shot noise in epitaxial double-barrier magnetic tunnel junctions}, journal = {IEEE Transactions on Magnetics}, year = {2013}, volume = {49}, number = {7}, pages = {4347-4350}, note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84880842943\&partnerID=40\&md5=64dd058a9b4a18443d9d19d03bcc9a54}, author = {Cascales, J.P. and Martin, L. and Dulluard, A. and Hehn, M. and Tiusan, C. and Szczepa?ski, T. and Dugaev, V. and Barnaš, J. and Aliev, F.G.} } @Article { Cascales20134347, title = {Shot noise in epitaxial double-barrier magnetic tunnel junctions}, journal = {IEEE Transactions on Magnetics}, year = {2013}, volume = {49}, number = {7}, pages = {4347-4350}, note = {Centre de Comp{\'e}tences : MiNaLor micro et nanotechnologies}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84880842943\&partnerID=40\&md5=64dd058a9b4a18443d9d19d03bcc9a54}, author = {Cascales, J.P. and Martin, L. and Dulluard, A. and Hehn, M. and Tiusan, C. and Szczepa?ski, T. and Dugaev, V. and Barna?, J. and Aliev, F.G.} } @Article { Zhang2013, title = {Signature of magnetization dynamics in spin-transfer-driven nanopillars with tilted easy axis}, journal = {Applied Physics Letters}, year = {2013}, volume = {102}, number = {1}, note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84872350464\&partnerID=40\&md5=eae9e693ba3fa39f819baf4eea62e3ad}, author = {ZHANG, H. and Lin, W. and Mangin, S. and Zhang, Z. and Liu, Y.} } @Article { ISI:000313651600047, title = {Structural, tribological and resistivity studies of Ga substituted (Al71-xGax) Pd21Mn8 icosahedral and other intermetallic phases}, journal = {JOURNAL OF ALLOYS AND COMPOUNDS}, year = {2013}, volume = {551}, pages = {274-278}, note = {D{\'e}partement CP2S : M{\'e}tallurgie et Surfaces}, ISSN = {0925-8388}, DOI = {10.1016/j.jallcom.2012.09.130}, author = {Bohra, Murtaza and de Weerd, M. C. and Fournee, Vincent and Mandal, R. K. and Mukhopadhyay, N. K. and Chatterjee, Ratnamala and Sastry, G. V. S.} } @Article { ISI:000312615500004, title = {Surface electronic structure of InSb(001)-c(8 x 2)}, journal = {SURFACE SCIENCE}, year = {2013}, volume = {608}, pages = {22-30}, note = {D{\'e}partement P2M : Surfaces et Spectroscopies}, ISSN = {0039-6028}, DOI = {10.1016/j.susc.2012.09.009}, author = {Walczak, L. and Goryl, G. and Valbuena, M. A. and Vobomik, I. and Tejeda, A. and Taleb-Ibrahimi, A. and Kolodziej, J. J. and Segovia, P. and Michel, E. G.} } @Article { ISI:000321307000037, title = {Synthesis and electronic structure of a two dimensional pi-conjugated polythiophene}, journal = {CHEMICAL SCIENCE}, year = {2013}, volume = {4}, number = {8}, pages = {3263-3268}, note = {D{\'e}partement P2M : Surfaces et Spectroscopies}, ISSN = {2041-6520}, DOI = {10.1039/c3sc50800e}, author = {Cardenas, Luis and Gutzler, Rico and Lipton-Duffin, Josh and Fu, Chaoying and Brusso, Jaclyn L. and Dinca, Laurentiu E. and Vondracak, Martin and Fagot-Revurat, Yannick and Malterre, Daniel and Rosei, Federico and Perepichka, Dmitrii F.} } @Article { 201-3780, title = {Synthesis of platinum embedded in amorphous carbon by micro-gap discharge in heptane}, journal = {Materials Chemistry and Physics}, year = {2013}, volume = {142}, pages = {199-206}, abstract = {Micro-gap discharges created in heptane between two platinum pin-electrodes produce platinum particles embedded in an amorphous carbon matrix which exhibits a short-range order. The platinum particles can be sorted by size. The largest ones (>100 nm in diameter) are created by emission of droplets from the liquid pool formed when the discharge hits the electrode surface. They are submitted to high stress levels by fast thermal quenching. The smallest ones (<5 nm) are synthesized in the plasma. Nanoparticles with diameters ranging from 10 to 20 nm have structure defects and are synthesized in post-discharge where huge temperature gradients exist. The short-range order observed in carbon extends typically over 3 nm, and it is observed by high-resolution transmission electron microscopy. This ordered structure of carbon (and a fortiori sp(3) bonds which are identified by FTIR analyses) is clearly visible around the smallest nanoparticles and it is likely formed at the same location, i.e. in the plasma. (C) 2013 Elsevier B.V. All rights reserved.}, note = {D{\'e}partement CP2S : Exp{\'e}riences et Simulations des Plasmas R{\'e}actifs - Interaction plasma-surface et Traitement des Surfaces ESPRITS}, DOI = {http://dx.doi.org/10.1016/j.matchemphys.2013.07.006}, author = {Hamdan, A. and Noel, C. and Ghanbaja, J. and Migot-Choux, S. and Belmonte, T.} } @Article { Gopman2013, title = {Temperature dependence of the switching field in all-perpendicular spin-valve nanopillars}, journal = {Physical Review B - Condensed Matter and Materials Physics}, year = {2013}, volume = {88}, number = {10}, note = {D{\'e}partement P2M : Nanomagn{\'e}tisme et Electronique de Spin}, web_url = {http://www.scopus.com/inward/record.url?eid=2-s2.0-84884843823\&partnerID=40\&md5=c527e95f973a1a1420cf81d5e2507f35}, author = {Gopman, D.B. and Bedau, D. and Wolf, G. and Mangin, S. and Fullerton, E.E. and Katine, J.A. and Kent, A.D.} } @Article { ISI:000314881900009, title = {The 2 root 3 x 2 root 3R30 surface reconstruction of alkali/Si(111):B semiconducting surfaces}, journal = {APPLIED SURFACE SCIENCE}, year = {2013}, volume = {267}, pages = {35-39}, note = {D{\'e}partement P2M : Surfaces et Spectroscopies}, ISSN = {0169-4332}, DOI = {10.1016/j.apsusc.2012.05.062}, author = {Tournier-Colletta, C. and Chaput, L. and Tejeda, A. and Cardenas, L. A. and Kierren, B. and Malterre, D. and Fagot-Revurat, Y. and Le F{\`e}vre, P. and Bertran, F. and Taleb-Ibrahimi, A.} } @Article { 201-3786, title = {The effect of noble gas bombarding on nitrogen diffusion in steel.}, journal = {Materials Chemistry and Physics}, year = {2013}, volume = {143}, pages = {116-123}, abstract = {The low energy (similar to 50-350 eV) noble gases ion bombardment of the steel surface shows that the pre-treatments increase nitrogen diffusion by modifying the outermost structure of the material. The surface microstructure and morphology of the studied samples were characterized by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The crystalline and chemical structures in the outermost layers of the surface were analyzed by grazing angle X-ray diffraction (GAXRD) and photoemission electron spectroscopy (XPS). Temperature effusion studies of the implanted ions are used to elucidate the noble gases site localization in the network. The local compressive stress induced by the nearby iron atoms on the core level electron wave functions of the trapped noble gases are studied by photoemission electron spectroscopy (XPS) and interpreted considering a simple mechanical model. Nano-hardness measurements show the dependence of the material elastic constant on the energy of the implanted noble gases. Although the ion implantation range is about few nanometers, the atomic attrition effect is larger enough to modify the material structure in the range of micrometers. Two material stress zones were detected where the outermost layers shows compressive stress and the underneath layers shows tensile stress. The implanted noble gases can be easily removed by heating. A diffusion model for polycrystalline-phase systems is used in order to discuss the influence of the atomic attrition on the N diffusion coefficient. The concomitant effect of grain refining, stress, and surface texture on the enhancing nitrogen diffusion effect is discussed.}, note = {D{\'e}partement CP2S : Exp{\'e}riences et Simulations des Plasmas R{\'e}actifs - Interaction plasma-surface et Traitement des Surfaces ESPRITS}, DOI = {http://dx.doi.org/10.1016/j.matchemphys.2013.08.027}, author = {Ochoa, E.A. and Droppa, R. and Basso, R.L.O. and Morales, M. and Cucatti, S. and Zagonel, L.F. and Czerwiec, T. and Dos Santos, M.C. and Figueroa, C.A. and Alvarez, F.} } @Article { ISI:000321687800002, title = {The Intermetallic Compound ZnPd and Its Role in Methanol Steam Reforming}, journal = {CATALYSIS REVIEWS-SCIENCE AND ENGINEERING}, year = {2013}, volume = {55}, number = {3}, pages = {289-367}, note = {D{\'e}partement CP2S : M{\'e}tallurgie et Surfaces}, ISSN = {0161-4940}, DOI = {10.1080/01614940.2013.796192}, author = {Armbruester, M. and Behrens, M. and Foettinger, K. and Friedrich, M. and Gaudry, E. and Matam, S. K. and SHARMA, H. R.} } @Article { 201-3772, title = {Ti-Ar scattering cross sections by direct comparison of Monte Carlo simulations and laser-induced fluorescence spectroscopy in magnetron discharges.}, journal = {Journal of Physics D: Applied Physics}, year = {2013}, volume = {46}, pages = {175201}, abstract = {A 3D Monte Carlo code (OMEGA) was developed to simulate the transport of sputtered atoms in a magnetron discharge operating in direct current mode. Collisions between the sputtered Ti atoms and the neutral process gas atoms (Ar) were modelled. Spatially resolved simulated velocity distributions of the sputtered particles parallel as well as perpendicular to the cathode surface for different operating pressures were recorded and benchmarked against experimentally obtained profiles using laser-induced fluorescence. New differential (angular and energy-dependent) cross sections for Ti-Ar elastic collisions were thereby obtained, which resulted in good agreement between modelled and experimental results. The differences with respect to commonly used extrapolated Ar-Ar cross sections to describe the Ti-Ar interaction are highlighted and discussed.}, note = {D{\'e}partement CP2S : Exp{\'e}riences et Simulations des Plasmas R{\'e}actifs - Interaction plasma-surface et Traitement des Surfaces ESPRITS}, DOI = {http://dx.doi.org/10.1088/0022-3727/46/17/175201}, author = {Lundin, D. and Vitelaru, C. and Poucques, De and L and Brenning, N. and Minea., T.} } @Article { ISI:000314823600005, title = {Understanding the insulating nature of alkali-metal/Si(111):B interfaces}, journal = {JOURNAL OF PHYSICS-CONDENSED MATTER}, year = {2013}, volume = {25}, number = {9}, note = {D{\'e}partement P2M : Surfaces et Spectroscopies}, ISSN = {0953-8984}, DOI = {10.1088/0953-8984/25/9/094004}, author = {Fagot-Revurat, Y. and Tournier-Colletta, C. and Chaput, L. and Tejeda, A. and Cardenas, L. and Kierren, B. and Malterre, D. and Le F{\`e}vre, P. and Bertran, F. and Taleb-Ibrahimi, A.} }